Make Your Own Padded Speedlite Pouch

Hey kids! Did Santa bring you a speedlite for Christmas? Maybe it was a LumoPro or something similar that doesn’t come with its own pouch? Well, don’t let your new flash go unprotected out there. Just swipe some leftover bubblewrap and your trusty roll of two-inch gaffer tape and make your own ghetto-luxe padded pouch!
What you’ll need?
- 2″ gaffer tape
- Bubble wrap
- Your speedlite

Cut strips of bubblewrap. You can be a stickler and measure, or just keep your flash handy and eyeball it. You’ll want the front panel to be longer on the bottom (for the bottom of the pouch) and back panel to be longer on the top (for the flap.) Keep the smooth side of the bubblewrap on top since that will be the inside of the pouch. The tricky part is that last bit when you’re taping inside the pouch.


I made sure to keep the flash inside the bubblewrap womb to make sure I was never making it too tight. You can test the ingress/egress (sexy!) of the flash as you go along. From there it’s just a matter of taping it up as neatly or as gritty as you want. The beauty of gaffer tape is its “scultpability.” To help around the corners, take a square of gaff and rip it halfway, then make a corner from that. Again, you can be as tidy and exact as you wanna be. I’m from tha streetz, so I like mine a little rough. (Or, I’m just lazy.)

One other tip: If you’re testing your pouch to make sure it’s not too tight, make sure to test inserting the flash both ways as you go along. (Oh, behave!) The flash probably has a chubbier end so it might fit one way, but not the way you want it to.

For the top flap, if you have some adhesive Velcro ™ laying around, great! If not, you can make a strap by folding a piece of gaff in half, tape it on, and just slide the tongue of the flap in that. (Rowr!) Gaffer tape has some friction to it, so this works fine for me. (See first picture on top)
There you have it: A quick and dirty padded pouch for your speedlite. It doesn’t feel half bad next to my factory pouches. If you try this, or have better ideas, let me know. And if you dug this, Like us on Facebook!
previous post: Resurrection II: Canolite D! next post: Walter Dorwin Teague Meets Anthony Friedkin In My Mailbox
Tags:diy, flash, gaffertape, LumoPro, speedlights, speedlite, strobist
This entry was posted on Tuesday, December 27th, 2011 at 12:06 pm
You can follow any responses to this entry through the RSS 2.0 feed.